• ADM loop technology with
System Sensor/200 protocol
• Two inputs with lines monitored for
wire breakage and short circuit
• Status LEDs
• Setting of module address via
decadic rotary switches
• Mounting in module box or by means
of mounting base
Description
The addressable Monitor Module M220E serves for
the line-monitored integration of two contact detectors,
such as manual call points, sprinkler system contacts
or supervising contacts, into the bidirectional commu-
nication on the ADM loop with System Sensor/200
protocol.
Each input has an individual status LED. Separate
terminals enable the operation of the module with or
without the integrated dual-isolator.
Accessories for mounting on a wall, on a plate or on a
DIN rail are available.
Specifications
Operating voltage
Current consumption
Ambient temperature
Dimensions L × W × H
Colour
Supply through loop voltage
approx. 600µA (quiescent)
-20°C to +60°C
93 × 94 × 23 (mm)
cream
Weight
110g
Approval
VdS G202140
Order number
Order name
249101
Monitor Module 2xSurv.In/Anal./200/SS M220E
Building Safety. Building Security.
A
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
M220E_DBL_LST_EN_0804.PDF • PAGE 1
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
|