Planet Technology Switch FSD 804PS User Manual

 
Default IP address: 192.168.0.100  
Default Username: admin  
1. Package Content  
Default Password: admin  
Thank you for purchasing PLANET 8-Port 10/100Mbps with  
4-Port PoE Web Smart Switch, FSD-804PS. Terms of “PoE  
Switch” in following section of this Quick installation guide  
means the FSD-804PS.  
To access the Web interface then the Web login screen  
appears in Figure 1  
Upon open the box of the PoE Switch and carefully unpack  
it. The box should contain the following items:  
• The PoE Switch x 1  
• User’s manual CD x 1  
• This Quick Installation Guide x 1  
• Power Cord x 1  
• Rubber feet x 4  
If any item is found missing or damaged, please contact  
your local reseller for replacement.  
Figure 1 Log in Screen of FSD-804PS  
2. Requirements  
After entering the username and password (default user  
name and password is “admin”) in login screen (Figure 1  
appears). The Web main screen appears as Figure 2.  
The FSD-804PS provide remote Web interface for manage;  
the following equipments are necessary for further  
management.  
• Network cables: Use standard network (UTP) cables with  
RJ45 connectors.  
• Subscriber PC installed with Ethernet NIC (Network Card)  
• The operate system of subscriber PC that running Windows  
98/ME, NT4.0, 2000/XP, MAC OS9 or later, Linux, UNIX or  
other platform compatible with TCP/IP protocols.  
Figure 2 Web Main Screen of FSD-804PS  
3. Start Web Management  
Now, you can use the Web management interface to  
continue the Switch management, please refer to the user  
manual for more.  
The PLANET FSD-804PS provide a built-in browser interface.  
You can manage the Switch remotely by having a remote  
host with Web browser, such as Microsoft Internet Explorer,  
Netscape Navigator or Mozilla Firefox.  
For security reason, please change and  
memorize the new password after this first  
setup.  
Note  
Make sure the manager PC must be set on the same IP  
subnet address, for example, the default IP address of  
the PoE Switch is 192.168.0.100 (the factory-default IP  
address), then the manager PC should be set at 192.168.0.x  
(where x is a number between 1 and 254, except 100), and  
the default subnet mask is 255.255.255.0.  
Use Internet Explorer 5.0 or above Web browser, enter  
default IP address http://192.168.0.100  
– 1 –  
– 2 –  
 
4. While IP Address lost or forgotten  
admin password –  
5. Customer Support  
Thank you for purchase PLANET products. You can browse  
our online FAQ resource at the PLANET web site first to  
check if it could solve you issue. If you need more support  
information, please contact PLANET switch support team.  
To reset the IP address to the default IP Address  
“192.168.0.100” and the use name / password to factory  
default mode (default user name and password is admin).  
Press the hardware reset button at the front panel about  
10 seconds. After the device is rebooted, you can login  
the management Web interface within the same subnet of  
192.168.0.xx and default use name / password.  
PLANET online FAQ :  
Switch support team mail address :  
Copyright © PLANET Technology Corp. 2008.  
Contents subject to revision without prior notice.  
PLANET is a registered trademark of PLANET Technology  
Corp. All other trademarks belong to their respective owners.  
Hardware Reset  
 

Peavey Speaker System 10P User Manual
Pelco Network Card C2907M D User Manual
Pfaff Sewing Machine 2058 User Manual
Philips Home Theater System HTS3540 12 User Manual
Philips Refrigerator LPS 100 User Manual
Pioneer Car Stereo System KEH P6021R User Manual
Polycom Network Hardware 6400 S User Manual
Polycom Webcam RMX 500 User Manual
Presto Rice Cooker Rice Cooker User Manual
ProForm Exercise Bike 83129325 User Manual