Server Technology Switch CW 8H User Manual

Sentry : Solutions for the Data Center Equipment Cabinet  
Sentry Switched CDU  
CW-8H  
Key Features  
> Remote Power Management:  
Power cycle individual power  
outlets, or groups of power  
outlets, to remotely reboot  
servers and network devices,  
anywhere in the world. Or,  
power-off unused power  
receptacles  
> High Power Distribution: 120V,  
208V, or 230V power; 20 or  
30-Amp power input feed  
options  
> High Density: Single power  
input feed; 8 outlets per 1U  
enclosure  
> IP Access & Security: Web  
interface, SSL, SSH,Telnet, SNMP,  
FTP, SNTP, Syslog, LDAP, LDAPS,  
TACACS and RS-232 access  
> Add an Expansion Module:  
Daisy chain the Switched CDU  
Expansion Module (CW/CX) for  
power management of separate  
power circuits from a single IP  
address  
> Environmental Monitoring:  
Each Switched CDU supports two  
temperature & humidity probes  
and reports conditions thru the  
Web interface  
> SNMP Traps: Provide automated  
alerts for power and  
environmental conditions  
High-Density Power Distribution  
The Switched CDU’s combine remote configuration and management with power  
distribution and power and environmental monitoring. Reboot a single or  
dual-power server with one command. Receive SNMP-based alerts and email alerts  
when power or environmental conditions exceed thresholds. Assign users specific  
access rights to designated outlets or groups.  
Only the Switched CDU products provide the flexibility needed for all data centers  
and remote sites, including power requirements for high-amp, high voltage; UL  
60950-1 branch circuit protection; SSL & SSH security; and SNMP-based input current  
monitoring.  
Additional Benefits:  
Branch Circuit Protection  
The Sentry CDU Family meets the new UL 60950-1  
requirement for branch circuit protection.  
Attention! The Sentry CDU products meet the above criteria by  
providing overcurrent protection with UL-listed Bussman SC fuses for  
each branch circuit. The CW-8H contains fuses within the enclosure.  
Input Current Monitoring  
> Input Current Monitor:  
Precisely measure the aggregate  
current draw (in amps) on each  
power circuit. On-site  
verification of the input current  
with the LED digital display.  
Remote verification via browser  
or serial screen.  
The CDU’s exclusive True RMS current monitoring is critical  
to preventing overloads in high-density computing  
environments. LED digital displays on the CDU enclosure  
report the input current of each phase or branch circuit.  
Temperature and Humidity  
> Power-up Sequencing: Prevent  
an in-rush power overload  
The Switched CDU supports two external probes. Each of  
these probes measure both temperature and humidity.  
Receive SNMP-based alert notifications when conditions  
exceed defined thresholds.  
 

Sharp Fax Machine FO 1530 User Manual
Sharp Projector XG NV5XU User Manual
Sharp Stereo System XL MP60 User Manual
Socket Mobile Network Card IB810 User Manual
Sony Cassette Player WM FX661 User Manual
Sony Computer Monitor SDM M51D User Manual
Sony Ericsson Cell Phone 1102101 BV User Manual
Sony Printer iP1200 User Manual
Sony Projector FE40L VPL FX40 User Manual
StarTechcom Computer Hardware PEXSATA22I User Manual