Sharp PDAs Smartphones ZQ P20A User Manual

ELECTRONIC ORGANIZER  
MODEL  
OPERATION MANUAL  
-
ZQ P20A  
CONTENTS  
Part Names .......................................................................................... 1  
Using the Organizer for the First Time ............................................... 2  
Entering Characters ............................................................................ 2  
Clock Mode .......................................................................................... 3  
Telephone Mode .................................................................................. 6  
Schedule Mode ................................................................................... 7  
To Do Mode ......................................................................................... 8  
Memo Mode ......................................................................................... 8  
Notes for storing and recalling entries ................................................ 9  
Recalling entries .................................................................................. 9  
Editing or deleting entries ................................................................. 10  
Calculator Mode ................................................................................ 10  
Currency/Unit Conversion Mode ....................................................... 11  
Game Mode ....................................................................................... 12  
Spell Checker Mode .......................................................................... 13  
Diet Function Mode ........................................................................... 14  
Backlight function .............................................................................. 18  
Memory Storage ................................................................................ 18  
Managing the Organizer’s Memory................................................... 19  
Adjusting the LCD contrast ............................................................... 19  
Secret Function ................................................................................. 19  
Using the Included PC Software ....................................................... 21  
Battery Replacement ......................................................................... 25  
Specifications .................................................................................... 26  
 
Part Names  
Part Names  
Key Assignments  
: 2nd Function key  
Stylus  
Activates the second function specifically assigned to the next  
key tapped.  
Option port  
Display  
( ABC ): Spell Checker mode key  
( DIET GAME ): Diet Function/Game mode key  
( TEL ): Telephone mode key  
RESET switch  
(on the back of the unit)  
Touch Keyboard section  
Mode keys  
(
SCHEDULE ): Schedule mode key  
ENTER key  
Backlight key  
Cursor keys  
( MEMO ): Memo mode key  
( TO DO ): To Do mode key  
Search keys  
( CLOCK ): Home Clock/World Clock mode key  
( CALC/CONV ): Calculation/Conversion mode key  
Power ON/OFF key  
• In this manual, these Mode keys are represented with icons in  
parentheses.  
1
 
MENU  
• The key touch tone is turned on and off by tapping h  
select “KEY TONE?” using > or < , and press x.  
,
Using the Organizer for the First Time  
Select “TONE ON” or “TONE OFF” using > or < , then press  
x. When the tone is activated, “ ” will appear.  
Be sure to perform the following operations before using the Organizer  
for the first time.  
1. Remove the isolating film that is  
affixed to the battery holder on the  
back of the unit.  
2. Press the RESET switch with a stylus.  
Entering Characters  
RESET  
Touch Keyboard  
“RESET?” is displayed.  
3. Tap f and press x to initialize  
the Organizer.  
Alphabet entry mode  
Number entry mode  
“RESET!” is displayed. You have now  
cleared the memory contents.  
The Select Language screen then appears.  
Guidance messages can be displayed in 10  
languages – English, Italian, German, French,  
Spanish, Portuguese, Hungarian, Czech,  
Polish, and Greek. After initializing the  
Organizer, the default setting is English.  
Select the desired language using > or  
<, then press x.  
RESET  
• Each time f is tapped, the touch keyboard switches between the  
Alphabet entry mode and the Number entry mode.  
To tap the touch keys, use the attached stylus.  
• Tap towards the center of each key.  
• Numbers, alphanumeric letters, symbols, and “+ – × ÷ .”  
can be entered into the dot display area (the 1st line).  
• Numbers and some characters (only space, –,  
F, and P in Telephone mode) can be entered into the number display  
area (the 2nd and the 3rd lines).  
Home clock is displayed. (See “Clock Mode”.)  
NOTES  
• If the Organizer is subject to strong, extraneous electrical noises or  
• Letters are entered in capital letters (“CAPS” is turned on). To enter  
lowercase letters, tap CAPS to turn “CAPS” off.  
shocks during use, an abnormal condition may occur in which no  
OFF  
keys (including  
) will respond. Press the RESET switch, tap  
ON  
f , then press x to delete all the memory contents.  
• To minimize battery consumption, the Organizer is designed to  
automatically turn off when no key has been pressed for approxi-  
mately 5 minutes.  
Entering symbols and letters with an accent mark  
• To enter a symbol, tap SMBL repeatedly until the desired symbol  
appears:  
¡¿æµ¢,  
@#$£¥ ( )~’: /\_&<>ß!?  
2
 
• To enter a letter with an accent mark, tap the relevant key shown  
below repeatedly after tapping s.  
Clock Mode  
(Key) (CAPS ON)  
(CAPS OFF)  
(Key) (CAPS ON)  
(CAPS OFF)  
Home clock  
Daylight saving time  
set ( with #)  
Home city (with “ ”)  
Day of the week  
2nd  
CAPS  
LON  
#
SUN  
1 1 2 0 0 6  
Date  
Time  
1 2 0 0 0 0  
• Activate “CAPS” on to enter capitalized letters.  
CLOCK  
Each time  
is tapped, the clock switches between the Home  
clock and the World clock mode. (For World clock, “ ” is not  
displayed.)  
Making corrections  
Move the cursor to the character to be corrected.  
Enter the correct character to replace the previous one.  
1. Before setting the clock  
Cursor  
The default setting for the date is DD/MM/YYYY(day-month-year).  
To change the setting to YYYY/MM/DD(year-month-day) or MM/  
DD/YYYY(month-day-year):  
The cursor (_) indicates the position for entering a character. Move the  
cursor with the cursor keys (  
).  
CLOCK  
Inserting characters  
1. Tap  
once or twice to display the Home clock (with “ ”).  
INS  
Each time  
is tapped, a space is inserted at the cursor position to  
MENU  
2. Tap  
, select DATE SET?using k or m , and press  
allow character entry.  
x.  
Deleting characters  
3. Press > or < to select the desired type.  
DEL  
Tap  
Tap  
to delete the character at the cursor position.  
to clear all the characters you have entered and yet to be  
ENTER  
4. Press  
to store the new setting.  
C•CE  
To change the 24-hour clock to the 12-hour clock, tap Z (Aor  
stored.  
Pis displayed). Each time Z is tapped, the clock switches.  
For daylight saving time/summer time, tap  
in advance (#is  
DST  
displayed on the left side of the day of the week).  
3
 
2. Setting the clock  
Display  
City  
Display  
City  
LON  
LIS  
LONDON  
LISBON  
PARIS  
BERLIN  
ROME  
AMSTERDAM  
BARCELONA  
HELSINKI  
CAIRO  
MOSCOW  
RIYADH  
TEHRAN  
DUBAI  
KABUL  
KARACHI  
NEW DELHI  
DHAKA  
YANGON  
BANGKOK  
BEIJING  
TYO  
ADL  
SYD  
GUM  
NOU  
WLG  
AKL  
TNG  
MID  
HNL  
ANC  
LAX  
DEN  
CHI  
NYC  
YYZ  
CCS  
RIO  
MAT  
2H  
AZO  
TOKYO  
ADELAIDE  
SYDNEY  
GUAM  
NOUMEA  
WELLINGTON  
AUCKLAND  
TONGA  
CLOCK  
1. Tap  
once or twice to display the Home clock (with “ ”).  
2. Tap f e to start setting.  
The cursor starts to flash on the city name.  
PAR  
BER  
ROM  
AMS  
BCN  
HEL  
CAI  
MOW  
RUH  
THR  
DXB  
KBL  
KHI  
DEL  
DAC  
RGN  
BKK  
BEI  
HKG  
SIN  
3. Press > or < to select the desired city. (Refer to the list of  
cities described below.)  
Enter the city name, if needed (6 characters or under). Only one  
changed name for Home clock can be stored.  
MIDWAY  
HONOLULU  
ANCHORAGE  
LOS ANGELES  
DENVER  
CHICAGO  
NEW YORK  
TORONTO  
4. Tap to move the cursor to the day.  
5. Enter the day, the month, and the year (4 digits ).  
The built-in calendar extends from January 1st, 1901, to  
December 31st, 2098.  
Tap AM/PM to select A(morning) or P(afternoon) for the 12-  
CARACAS  
hour clock (in 12 hour).  
RIO DE JANEIRO  
MID ATLANTIC  
2hrs behind LON  
AZORES ISLANDS  
6. Enter the time (hours and minutes).  
ENTER  
7. Press  
. The clock starts from 00seconds.  
HONG KONG  
SINGAPORE  
Notes  
To enter a single-digit date or time, enter 0and the digit (e.g.  
02).  
3. Using World clock  
If you enter an invalid date or time, ERROR!appears briefly. Enter  
the correct date and time and press  
CLOCK  
1. Tap  
once or twice to display the World clock (without  
ENTER  
.
).  
2. Press > or < to select the desired city.  
4. Changing the cities between Home and World  
clocks  
You can change the home city for a city in another time zone without  
adjusting the stored correct time.  
4
 
CLOCK  
1. Tap  
once or twice to display the World clock (without  
ALARM2, and ALARM3).  
).  
2. Hourly alarm ...... beeps every hour when minutes reach 00, when  
is turned on.  
2. Press > or < and select the desired city to be set as the  
new home city.  
3. Schedule alarm .. beeps at the time for all the schedule entries (for 1  
minute), when “  
Schedule Mode.)  
Tap any key to stop the alarm beeping.  
is turned on. (Refer to  
3. Tap f e to change the cities between Home and World  
clocks.  
The previous home city is now set as the world city (without  
).  
Setting/Changing the daily alarm time  
CLOCK  
4. Tap  
to check the home city.  
CLOCK  
1. Tap  
once or twice to display Home clock (with “ ”).  
The selected city in step 2 is set as the home city (with “ ”).  
2. Tap to display the ALARM1 screen.  
Press > or < to display ALARM2 or ALARM3.  
CLOCK  
5. Tap  
to recheck the world city, and press > or < to  
select the new world city, if needed.  
3. Tap  
or  
to display the screen is turned on the daily alarm, if  
the daily alarm time is not displayed.  
(The display differs between the 12-hour and 24-hour clock.)  
5. Setting daylight saving time (DST: summer time)  
CLOCK  
1. Tap  
once or twice to display the Home or the World clock.  
4. Tap f e.  
5. Enter the time.  
ENTER  
DST  
2. Tap  
.
#is displayed. The time is set 1 hour ahead. To clear DST, tap  
6. Press  
.
DST  
to clear #. The time is set 1 hour behind.  
The daily alarm time is set.  
Notes  
Turning the alarms on and off  
DST can be set independently in either Home or World clock.  
When DST is set for one world city, it is used for all cities displayed  
in World clock.  
An alarm sounds only when the respective symbol (  
is turned on.  
Display Home clock (tap  
,
, or  
)
CLOCK  
once or twice) and tap to display  
6. Setting alarms  
The Organizer has 3 types of alarms:  
1. Daily alarm ........ beeps every day at the alarm time (for 1 minute),  
the daily alarm screen.  
Each time you tap while the daily alarm screen is displayed, the  
combination of symbols switches.  
when “ ” is turned on.  
Note  
Up to three daily alarms can be set (ALARM1,  
Alarms sound even when the Organizer is turned off.  
5
 
Turning the each daily alarm on and off  
1. Display Home clock and tap  
2. Press > or < to display the daily alarm screen.  
Telephone Mode  
.
Telephone mode has two directories for storing data. Tap TEL to  
toggle between 1and 2on the display.  
Use these files for convenience, e.g. business and private files.  
A telephone entry consists of name, address, E-mail address, web  
address (URL) and number fields.  
3. Each time you tap  
or , the daily alarm you selected turns on or  
off (e.g. daily alarm1).  
Storing telephone entries  
1. Tap TEL once or twice to display the  
Telephone mode screen.  
ALARM on  
Note  
ALARM off  
1
CAPS  
NAME ?  
SPACE  
The daily alarm which is turned off does not beep even though the  
is displayed.  
2. Enter name, e.g. SMITH  
and tap  
3. Enter address, e.g. f 18  
tap  
4. Enter E-mail address, e.g. SROB  
l (to enter “ ”) SHARPSEC.COM, and  
ROBERT,  
.
SPACE  
SPACE  
f EAST  
ROAD, and  
.
E-mail  
1
SMBL  
h a r p s e c . c om  
@
tap  
.
The E-mail address is automatically  
entered in lowercase letters.  
@
SMBL  
To enter “ ”, simply tap  
instead of  
.
@
5. Enter web address (URL), e.g.  
WWW.SHARPUSA.COM, and tap  
.
2nd  
1
CAPS  
6. Enter phone number, and fax number if  
needed, e.g.  
NUMBER?  
2 3 4 5 6 7 8 9 0  
012-3456-7890  
F
f
3 4 5 6 7 8 9 1  
SPACE SPACE SPACE  
3456-7891,  
and press ENTER  
.
6
 
• “STORED!appears briefly, then the Telephone mode screen is  
displayed. The telephone entry is now stored.  
Schedule Mode  
Number of  
Schedule mode is used for storing schedule details (36 characters or  
under), date and time (year, month, day, hour, and minute).  
In the 1st line the same characters are allowable as in Telephone  
mode.  
Field  
Allowable characters  
characters  
The 1st line:  
Name,  
E-mail address,  
web address (URL)  
36 characters or  
under  
Alphabetic letters, numbers,  
symbols, + × ÷ ., space  
address  
72 characters or  
under  
1. Storing schedule entries  
1. Tap  
mode screen.  
to display the Schedule  
The 2nd and the  
3rd lines:  
Phone number  
Numbers, space, ,  
F (Fax),  
P (Pager)  
SCHEDULE?  
36 characters or  
under  
2. Enter the details and tap  
3. Enter the date and time.  
.
Notes  
The types of date and time are the same as the types set for the  
clock.  
To enter a single-digit date or time, enter 0and the digit (e.g.  
O2).  
The symbol NAME, ADDRESS, E-mail, or URLis turned on  
while entering in each field.  
To skip entry of an address, E-mail address, web address (URL), or  
number, tap when ADDRESS?, E-MAIL?, URL?, or  
NUMBER?is displayed. However, entry must be made at the  
"NAME?" field.  
ENTER  
4. Press  
Notes  
to store in the memory.  
Schedules for the following dates can be stored: January 1901 to  
December 2098.  
If an attempt is made to store an entry without a date or time, or  
with an invalid date or time, ERROR!appears briefly. Enter the  
ENTER  
correct date and time and press  
.
2. Alarm for Schedule mode  
When the schedule alarm (“  
) is turned on, it is set for all the  
schedule entries. Beeping sounds for 1 minute when the time for a  
schedule entry is reached. Tap any key to stop the alarm. The schedule  
alarm cannot be set for an individual entry.  
7
 
To Do Mode  
Memo Mode  
In the To Do mode, you can store your important To Do items with a  
priority index.  
Notes or other information irrelevant to the Telephone mode or the  
Schedule mode can be entered conveniently in this Memo mode.  
In the 1st line the same characters are allowable as in Telephone  
mode. In the 2nd and the 3rd lines you can enter numbers, , and  
space. (36 characters or under can be entered in each line.)  
Storing To Do entries  
1. Tap TO DO to enter the To Do mode.  
2. Enter the description and tap  
3. Select the Priority number from 1(High) to 9(Low) enter the  
number, then tap  
.
Storing memo entries  
CAPS  
1. Tap  
screen.  
to display the Memo mode  
MEMO?  
.
4. Enter the date and time.  
The types of date and time are the same as the types set for the  
clock.  
2nd  
CAPS  
2. Enter the memo item and numbers.  
UN I ON BANK  
0 1  
To enter a single-digit date or time, enter 0and the digit (e.g.  
O2).  
SPACE  
E.g. UNION  
BANK  
01  
272-0011223  
2 7 2 0 0 1 1 2 2 3  
ENTER  
5. Press  
to store in the memory.  
ENTER  
3. Press  
to store in the memory.  
DONE Completed Items  
1. Tap TO DO to enter the To Do mode.  
2. Press < or > to select the To Do items.  
3. Tap e  
to enter the status field.  
ENTER  
4. Tap to select D(Done), then press  
.
• “Pstands for pending.  
8
 
Sorting order  
Notes for storing and recalling entries  
Telephone and memo entries are stored by the first character of the  
persons name or memo item in the following order (case sensitive):  
When the memory is full, MEMORY FULL!appears briefly, and the  
entry cannot be stored.  
When the symbol “ ” or “ ” appears, more information exists. Tap  
or to switch the display.  
Checking details of entries in Telephone mode  
To display each field on the 1st line, follow the symbol “ ” or “  
and tap or . (The symbol above the 1st line shows each field.)  
Tap and hold  
to stop or restart the scroll. Tap  
to start the auto scroll on the 1st line. Tap again  
CCE  
to quit the auto scroll.  
• “Chand chare available in Czech language mode only.  
Schedule entries are stored by date and time.  
To Do entries are stored in the following order : STATUS, PRIORITY,  
and DATE.  
Note  
Recalling entries – Telephone, Schedule, To Do, Memo –  
When there is no (further or relevant) entry to be recalled, NOT  
FOUND!appears briefly, and the display returns to the mode  
screen.  
Tap the desired mode key first.  
< : Recalls entries in forward order  
> : Recalls entries in reverse order  
Greek characters are sorted as follows:  
Sequential search  
Press < or > in each mode.  
Direct search  
Enter the first characters (12 characters or under) of the persons  
name, schedule details, To Do item or memo item, and press <  
or >.  
Press < or > then, to continue performing a direct search.  
9
 
Editing or deleting entries  
Calculator Mode  
2nd  
Editing  
The Organizer can calculate numbers of up  
to 10 digits. Tap CALC/CONV several times  
to display the Calculator mode screen  
(Calculator Currency conversion Unit  
conversion Calculator...).  
1. Recall the entry to be edited.  
EDIT  
2. Tap  
. The cursor starts to flash.  
, or to move the cursor to the position to be  
0.  
3. Tap  
edited.  
,
,
4. Enter, insert, or delete characters (refer to Entering Characters).  
Calculation  
Be sure to tap CCE  
memory before performing a calculation.  
Note  
CCE  
To cancel editing, tap  
.
CM  
,
CCE , and  
to clear the display and  
5. Press ENTER several times (until STORED!appears briefly) to  
finish editing and to store the entry.  
When  
,
,
, or is tapped, the respective symbol, +, , ×, or ÷  
Deleting  
is displayed. (In the examples in this manual, these symbols are not  
described.)  
1. Recall the entry to be deleted.  
DEL  
2. Tap  
.
If an error occurs  
• “DELETE?is displayed.  
If the calculation result or the integer section in the numerical value in  
the memory exceeds 10 digits or if a number is divided by zero (0), an  
error occurs (ERRORis displayed).  
To cancel the deletion operation, tap f.  
3. Press ENTER to delete the entry.  
10  
 
Calculation examples  
Currency/Unit Conversion Mode  
Example  
Operation  
Display  
–5.5  
CCE  
(24+2)÷4=5.5  
34+57=91  
24  
2
4
1. Setting a currency rate  
34  
45  
(The addend becomes a constant.)  
57  
91.  
2nd  
CAPS  
1. Tap  
several times to display  
CALC/CONV  
45+57=102  
102.  
EURO  
USD  
the currency conversion mode screen  
(refer to Calculator mode).  
Example: 1 CAD (Canada dollars)  
= 0.66 USD (US dollars)  
0.  
68×25=1700  
68  
25  
40  
1700.  
2720.  
68×40=2720  
(The multiplicand becomes a constant.)  
2. Press < < < to change the display and tap f e.  
The initial character of CADstarts to flash.  
%
200×10%=20  
9÷36=25%  
200  
9
10  
20.  
25.  
%
36  
You can change each currency name by entering characters (up to  
4 in each) and using , if needed.  
%
%
200+(200×10%)=220  
500(500×20%)=400  
46=(43)2=4096  
1/8=0.125  
200  
500  
4
10  
20  
220.  
400.  
ENTER  
3. Press  
. 0starts to flash.  
4096.  
0.125  
M 125.  
2nd  
CAPS  
4. Enter the rate (up to 10 digits).  
8
CAD  
USD  
0.6 6  
CM  
+
+
25×5=125  
25  
84  
68  
5
3
M
M
M
0.66  
M
) 84÷3=28  
+) 68+17=85  
182  
28.  
ENTER  
5. Press  
to store in the memory.  
M
17  
85.  
RM  
M 182.  
2. Converting currency/unit  
ǰȉ  
ǰȉȉ  
259=4  
25  
9
4.  
You need to set the conversion rate before making the currency  
conversion.  
1234567890×145  
1234567890  
145  
ERROR  
17.90123440  
=179012344050  
Example: Convert 500 CAD into USD using the rate that you have set.  
1. Display the screen: CAD USD.  
2. Enter the value to be converted.  
500  
CCE  
17.90123440  
(17.90123440×1010=179012344000)  
11  
 
2nd  
CAPS  
The dealers  
SPACE  
3. Tap to convert CAD into USD.  
To convert in reverse order (e.g. 200  
USD into CAD), enter 200 and tap  
4. Tap  
Each time  
card is dealt.  
to see your hand.  
Your hand  
CAD  
USD  
3 30.  
hand  
SPACE  
is tapped, a new  
2nd  
CAPS  
.
J 2 8  
4
You can use the unit conversion in the  
• “J, Q, and Kare counted as 10.  
• “Acan be counted as 1 or 11.  
When the first 2 cards are Aand a  
face card (J, Q, or K), your hand  
is BLACKJACK.  
1 0  
2 0  
same manner. You cannot change the units or the rates for units.  
The conversion result may have a slight error as a result of  
rounding off the number (e.g. up to 2 decimal places for currency  
conversions). Use the conversion result for reference.  
Your bet Your chips  
The dealers  
Your total  
total  
ENTER  
5. Press  
to stop being dealt and  
hold your hand. The dealers hand and  
the results are displayed.  
2nd  
CAPS  
J 2 8  
2 0  
3 2 K 4  
1 9  
When you win, your total flashes and  
your bet is doubled.  
When you win with BLACKJACK,  
your bet is tripled.  
2 0  
2 0  
Game Mode  
Your bet Your chips  
GAME  
Tap  
several times to display the Game mode screen and the  
Diet Function mode screen (Diet Function BLACKJACK ALPHA  
ATTACK Diet Function ...).  
ENTER  
6. Press  
and display the Game mode screen.  
When you have no more chips to bet, the game is over.  
To quit the game, tap any mode key. Your chips are stored for the  
next time.  
BLACKJACK (Twenty-one)  
Make your hand(the total of the numbers on the cards) as close to  
DEL  
ENTER  
To return your chips to 30, tap f  
the Game mode screen.  
and press  
on  
21, without going over 21.  
2nd  
CAPS  
GAME  
1. Tap  
once, twice, or three times to  
B L ACK J ACK  
ALPHA ATTACK  
display the BLACK JACKscreen.  
Type in characters (A to Z) displayed on the 1st line to clear them. 20  
3 0  
levels of speed are available.  
Your chips  
2nd  
CAPS  
GAME  
1. Tap  
once, twice, or three times to  
A L PHA AT TACK  
0 1  
display the ALPHA ATTACKscreen.  
ENTER  
2. Press  
to start a game. The left 2 cards are dealt for you.  
2. Enter the level number (2 digits from 01  
to 20).  
(One card is faced up and the other is faced down.)  
Level  
3. Agree the left-displayed maximum bet (up to 10) or enter fewer bet.  
01: slow, 20: fast  
12  
 
ENTER  
3. Press  
to start a game.  
Spell Checker Mode  
CAPS  
4. Tap the same key as the first character at  
the left end of the 1st line. (In this case,  
tap keys in the order: E Y K W.)  
EYK  
W
The Spell Checker Mode can be helpful when the exact spelling of a  
query word is not known.  
0 1  
Pressing the correct key in the correct  
order deletes the character.  
When 12 characters are displayed in each level, the game  
continues in the faster level (up to 20).  
When no more characters can be displayed, the game is over. The  
Game mode screen with the level when the game is over is  
displayed.  
Searching a word with ambiguous spelling  
1. Tap  
Mode.  
to enter the Spell Checker  
ABC  
SPEL L :  
2. To check spelling, enter the word and tap  
p e r s o n a  
l
ENTER  
to start checking. Maximum  
length of the entry word is 36 characters.  
If the word is correctly spelled, a message CORRECT!appears  
briefly, then returns the word display screen.  
If the spelling of the entry word is found incorrect, then a  
number of related words appears; use k or m to browse the  
words. If the installed Spell Checker is unable to find any related  
word, then 0appears, followed by the initial entry screen.  
The Spell Checker Mode looks for a match of a given word  
against the installed database containing approximately 10000  
words.  
Variants of a given word, or the root of a given variant, may not  
always be specifically suggested.  
13  
 
Note:  
A stride lengthin this manual refers to the distance from the tip  
of your toe on one foot to the tip of your toe on the other when  
Diet Function Mode  
The Diet Function can organize your daily calories burned by walking,  
as well as managing your daily caloric intake. Tap  
to display the Diet Function mode screen and the Game mode screen  
(Diet Function BLACKJACK ALPHA ATTACK Diet Function  
taking a step.  
DIET  
several times  
1. Walk 10 normal steps, as shown in the illustration.  
2. Measure the distance you have traveled.  
3. Divide the distance by 10. Record the result as your stride length.  
Example:  
...).  
Distance traveled = 750 cm  
Stride length = 750 ÷ 10 = 75 cm  
PEDOMETER  
The Diet Function calculates the estimated calories burned by using  
the built-in pedometer, and compares the value with the entered  
target value. * The consumption by basal metabolism is not  
counted as part of this calculation.  
User Profile Mode  
Enter information such as your previously measured stride length  
and weight.  
Food items can be selected from the Food Database, or programmed  
as desired. Have the Organizer compare the value with the entered  
target intake value.  
DIET  
1. Tap  
once, twice, or three times to enter the Diet Function  
* Basal metabolism is the energy required to maintain your bodys  
vital functions such as breathing, your heart beating, and  
maintaining your body temperature.  
Mode.  
ENTER  
2. Select USER PROFILEusing k or m, and press  
Note:  
.
When using the Diet Function Mode for the first time, or after the  
Organizer has been reset, you will automatically be guided to the  
User Profile Mode.  
Follow the guidance of your physician when using this unit to  
organize your diet.  
Prior to using this function, you will need to measure your stride  
length and weight.  
3. Fill the STRIDE entry field with your  
STR I DE cm  
stride length value obtained from the  
above method, and tap m.  
4. Enter your body weight value in the  
WEIGHT field, and tap m.  
7 5  
Measuring your stride length  
In order for the Diet function to work properly, you must first  
measure your stride length.  
14  
 
5. Enter the target calorie value for your daily intake (I.T.CAL), and  
tap m.  
Secure the carrying case clip to your belt or to the top of your shorts  
or pants.  
6. Enter the target carbohydrate value for your daily intake  
The unit must be attached in a vertical position to the ground in order  
(I.T.CARBS.), and tap m.  
to count steps correctly.  
7. Enter the target calorie value of your daily consumption (C.T.CAL),  
ENTER  
then press  
to store the setting.  
Note:  
It is recommended that you refer to the appropriate documentation,  
or consult your physician before setting all target values such as  
your Daily caloric intake.  
Units such as LENGTH and WEIGHT can be changed in the MENU  
mode.  
Make sure that the holders clip is secured firmly in place. If worn  
improperly, the unit may be detached or may result in incorrect  
measurements.  
ENTER  
Select UNITin the MENU mode, then press  
. Use k m to  
The belt clip is designed to hold the unit while walking. The clip  
may not hold the unit or may break if it is exposed to a high-impact  
condition such as running, or playing basketball.  
select LENGTHor WEIGHT, then select a desired UNIT (cm/  
inch, kg/lb) using < or >.  
The unit may not count steps correctly if you:  
Walk at an irregular pace, or in a crowded place.  
Shuffle legs excessively.  
Wear sandals when walking.  
Vary your movement (play sports, for example).  
Move up/down excessively.  
Positioning the unit  
Close the cover, and insert the unit into the carrying case as shown  
in the illustration, then make sure that the top flap is fastened.  
Cover  
Are in a vehicle with vertical and horizontal motions.  
Attach the unit improperly (tilted, for example).  
Pedometer Mode  
Clip  
Set the pedometer to ON/OFF. To count steps, set it to ON.  
MENU  
CLOCK  
Tap  
then press  
, tap  
ENTER  
, and select PED.SETin the MENU mode,  
ENTER  
, use k or m to select ON, then press  
and start walking. To turn off the pedometer, select OFF.  
15  
 
Viewing the step count and calorie values  
2. Select CONSUMPTIONusing k or m, and press ENTER  
.
3. Use < and > to select a day you wish to display. To  
display step count and calorie consumption, use k or m.  
If no data is stored, a message NOT FOUND!is displayed.  
DIET  
1. Tap the  
once, twice, or three times to enter the Diet Function  
Mode.  
2. Select PEDOMETERusing k or m,  
CA LOR I E K c a l  
80.2 1 3  
ENTER  
and press  
twice to display the  
Food Database Mode  
interim report of calories burned and  
total step count.  
2 1 3 2 0 0 6  
Download the Food Database from the CD-ROM. (see page 24.)  
The Food database contains caloric values and total carbohydrate  
values of 200 foods. You can add to or edit the database, and these  
changes can be exchanged to/from the PC as an export/import item.  
Use k or m to switch the two displays.  
CCE  
Tap  
to return to the previous screen.  
Step count of the day will be registered automatically when the  
time is at 23:59:59.  
To add or modify the Food Database, follow the steps below.  
1. Create a CSV formatted file containing only food names to be  
added or modified.  
This unit calculates the calorie consumption with the following  
formula*:  
Refer to the \DATABASE\FOODLIST.CSV file on the bundled CD-  
ROM.  
2. Import the newly created file from your PC to the unit. See page  
24 for details.  
Since the data on the unit cannot be overwritten, import only the  
data to be added or modified.  
Importing the entire list will result in overlapping of all data.  
Calorie consumption [Kcal] = (step × stride [cm] × 0.001 + 3.5)  
× weight [kg] × 0.005  
The calculation runs once every minute to accumulate values.  
* Based on ACSMs Guidelines for Exercise Testing and  
Prescription, © American College of Sports Medicine, 2000.  
Published by Lippincott Williams & Wilkins, 2000.  
Notes:  
Notes:  
Check the memory on a regular basis.  
The food list contained in the CD-ROM is based on the Food  
Database Release 16 (Abbreviated Version) issued by the United  
States Department of Agriculture. Word ordering of items, as well  
as the ( ) symbol within some items, may have been modified.  
The indicated caloric/nutrient value in the Food Database is the  
amount per 100 grams edible portion of food.  
When the memory is full, an alert message is displayed, and the  
pedometer will not record your data. You will need to delete  
unnecessary data, or invoke the Memory management. To clear the  
ENTER  
alert display, press  
.
Under the low battery condition, step count function of the  
pedometer, and the calorie calculation may not be available.  
The displayed calorie value is rounded off to three decimal places.  
All companies and/or product names are trademarks and/or  
registered trademarks of their respective holders.  
Consumption Mode  
The daily calorie consumption and step count for the day can be  
Intake Mode  
Enter your daily food intake by selecting items from the FOOD  
DATABASE. Download the Food Database from the CD-ROM. (see  
page 24.)  
viewed.  
1. Tap  
DIET  
once, twice, or three times to enter the Diet Function  
Mode.  
16  
 
DIET  
1. Tap  
Mode.  
once, twice, or three times to enter the Diet Function  
browse the items using < or >. When no match is  
found, then a message NOT FOUND!is displayed.  
4. Use k or m to display the calorie value  
ENTER  
2. Select INTAKEusing k or m, and press  
.
CA LOR I E K c a l  
EDIT  
3. Tap  
, then use < and > to select a desired food in  
and other information.  
CCE  
the selection field.  
Tap  
to return to the initial  
80.2 1 3  
You can enter the first few letters of the desired food name, then  
browse the items using < or >.  
When no match is found, then a message "NOT FOUND!" is  
displayed.  
screen.  
5. To edit the selected item, tap  
EDIT  
. Move between the entry fields  
using k or m as you enter food names, calorie, and other values.  
ENTER  
6. Press  
to register the entries.  
4. Use k and m to select the entry field  
for each AMOUNT and the DATE of the  
intake to enter values.  
You can adjust the portion size by  
entering any decimal in the AMOUNT field.  
Example: 1 = 100g  
0.5 = 50g  
Note:  
AMOUNT  
The displayed calorie value is rounded off to three decimal places.  
1.  
2 5 3 2 0 0 6  
Report Mode  
The intake/consumption report for a specified period can be viewed.  
DIET  
1. Tap  
once, twice, or three times to enter the Diet Function  
Mode.  
0.25 = 25g  
ENTER  
2. Select REPORTusing k or m, and press  
.
ENTER  
5. Press  
Tap  
to write the entry.  
ENTER  
3. Press  
, and use k or m to select INTAKEREPORTor  
CCE  
to return to the initial display.  
CONSUMPTION.  
ENTER  
4. Press  
, and input values for  
Adding items to the Database  
REPORT –  
START DATE and END DATE, followed  
F 2 0 0 3 2 0 0 6  
E 2 0 0 3 2 0 0 6  
DIET  
1. Tap  
once, twice, or three times to enter the Diet Function  
ENTER  
by  
.
Mode.  
5. A report is displayed.  
ENTER  
2. Select FOODDATABASEusing k or m, and press  
.
INTAKEREPORT : Use k and m to switch between the total  
calorie display and total carbohydrate display.  
CONSUMPTION : The total calorie consumption value is  
displayed.  
3. Enter a desired food name of up to 72 characters.  
4. Use m to jump the field to the next, then enter calories and total  
ENTER  
carbohydrate value, followed by  
.
CCE  
Tap  
to return to the initial screen.  
The icon is displayed when a result  
exceeds the target value.  
g
Searching and Editing  
CARBS.  
2 0 0 0.  
2 0 0.  
The present carbohydrate  
A comparison against the days target  
(more/less) is indicated.  
DIET  
1. Tap  
once, twice, or three times to enter the Diet Function  
Mode.  
ENTER  
2. Select FOODDATABASEusing k or m, and press  
.
Note:  
The displayed calorie value is rounded off to three decimal places.  
3. Press < or > to select a desired food name.  
You can enter the first few letters of the desired food name, then  
17  
 
Backlight function  
Memory Storage  
T
he Backlight allows you to view the display and use the Organizer  
1. Checking memory storage  
even in low-light conditions. Pressing  
display for as long as you continue to use the Organizer, or until no  
key is pressed for 10 seconds.  
once illuminates the  
z
TEL  
1. Tap  
,
,
TO DO or  
to display NAME?,  
SCHEDULE?, TO DO?or MEMO?.  
2nd  
CAPS  
MENU  
2. Tap f  
, select MEMORY  
CHECKusing k or m , and press  
x. The number of remaining  
memory space is displayed briefly.  
To turn the Backlight off, press  
again.  
z
CAPA  
%
C I TY  
The Backlight may remain on for less than the preset interval or  
it may not function if the battery level is low.  
9 9  
The Backlight does not function in the PC Link mode.  
Do not use the Backlight unnecessarily  
2. Deleting all the memory contents  
Perform steps 2 and 3 as described in the section, Using the  
Organizer for the First Time.  
Since the Backlight drains power from the backlight battery,  
excessive use of the Backlight will significantly reduce the life of  
your battery.  
To cancel the deletion operation, press any key EXCEPT FOR f  
x in step 3.  
18  
 
Managing the Organizer’s Memory  
Adjusting the LCD contrast  
CLOCK  
1. Tap  
once or twice to display Home clock (with “ ”).  
Use the memory management function to utilize the Organizer's  
memory more efficiently.  
2. Press > or < to adjust the LCD contrast.  
Note:  
Before performing memory management, back up your data.  
While the memory management is in progress, do not press the  
RESET switch. Doing so may result in losing all the data stored in  
the Organizer.  
Secret Function  
TEL  
1. Tap  
,
,
or TO DO to display NAME?,  
1. Registering a password  
A Secret function is valid for Telephone, Schedule, To Do, and Memo  
modes.  
SCHEDULE?, TO DO?or MEMO?.  
MENU  
2. Tap f  
, select MANAGE MEM.using k or m.  
Up to 6 characters can be registered as the password.  
3. When x is pressed, a message PERFORM...appears to  
indicate that the memory management is in progress.  
If the password is forgotten, you cannot delete the password only. You  
have to delete all the memory contents. (Perform steps 2 and 3 as  
described in the section, Using the Organizer for the First Time.) As a  
safeguard, make a written record of the password.  
When done, the display will return to the initial screen.  
Note:  
By performing memory management, the amount of reusable  
memory (indicated in MEMORY CHECKunder [MENU]) will be  
utilized.  
Registering a password  
CLOCK  
1. Tap  
2. Tap  
once or twice to display Home clock (with “ ”).  
.
3. Enter a password (case sensitive), e.g.  
ENTER  
f ABC and press  
.
• “RECONFIRM !is displayed.  
If ERROR !appears briefly, the password has already been  
registered.  
19  
 
4. Enter the same password once more for verification and press  
The password is changed and display returns to the Home clock.  
The secret function turns on automatically.  
ENTER  
.
The display returns to the Home clock.  
The secret function turns on automatically.  
If you enter the wrong password, ERROR !appears briefly and  
display returns to the Home clock. Follow the above steps again  
to register a password.  
If you enter the wrong password, ERROR !appears briefly and  
display returns to the Home clock. Follow the above steps again  
to change the password.  
4. Deleting the password  
1. Tap on the Home clock (with “ ”).  
2. Turning Secret function off  
When the Secret function is on, it is necessary to turn off to perform  
the Telephone, Schedule, To Do, and Memo modes.  
ENTER  
2. Enter the password and press  
• “EDIT PASS.?is displayed.  
ENTER  
.
3. Press  
.
The password is displayed.  
4. Tap CCE  
TEL  
1. Tap  
,
,
or  
.
.
TO DO  
• “PASSWORD?is displayed.  
2. Enter the password and press  
• “DEL PASS.?is displayed.  
ENTER  
ENTER  
.
5. Press  
to delete the password.  
If you enter an incorrect password, ERROR!appears briefly.  
Follow the above steps and enter the correct password.  
Secret function will be automatically turned on after the power is  
turned off manually or automatically.  
3. Changing the password  
1. Tap on the Home clock (with “ ”).  
ENTER  
2. Enter the password and press  
• “EDIT PASS.?is displayed.  
ENTER  
.
3. Press  
.
The initial character of the password starts to flash.  
ENTER  
4. Modify the password and press  
.
• “RECONFIRM !is displayed.  
5. Enter the same password once more for verification and press  
.
ENTER  
20  
 
Limitations when using with Windows® XP/2000  
Using the Included PC Software  
Windows® XP  
Log onto your PC with administrator privileges; the software may  
not be installed properly otherwise. Upon using the software, you  
will need to log on as an administrator. If you are logged in as a  
non-administrative account, then you must first log off to log  
into an administrator's account.  
The CD-ROM contains software to enable exchange of data with a  
PC.  
The software consists of:  
Synchronization Software:  
Can be used to synchronize Microsoft® Outlook® data, such as  
Contacts, Calendar, Tasks, and Notes, with the Organizer.  
Windows® 2000  
When installing as well as using the software, you will need to  
log on as an administrator. If necessary, you may need to contact  
the administrator of the PC in a work environment.  
Desktop Utilities:  
Can be used to backup/restore data in the Organizer and export/  
import data to different file formats.  
Connecting the Organizer to Your PC  
1. Turn off your PC and the Organizer.  
Minimum System Requirements:  
IBM PC or 100% compatible  
2. Connect the standard 9-pin connector of the PC-Link cable to the  
PCs serial port.  
Using a 25-pin connector will require an additional adapter.  
(Commercially available)  
3. Connect the other end of the PC-Link cable to the Organizers  
option port.  
4. Turn on the PC and the Organizer.  
®
®
Microsoft Windows 98/98SE/2000 Professional/Me/XP Home/XP  
Professional  
®
Pentium 300MHz or higher  
50MB free hard disk space  
64MB RAM for Microsoft Windows 98/98SE/2000 Professional/  
®
®
Me  
®
®
128MB RAM for Microsoft Windows XP Home/XP Professional  
One available 9-pin serial port  
CD-ROM drive  
Mouse or compatible pointing device  
Additional System Requirements:  
®
®
Microsoft Outlook 98/2000/2002/2003 must be installed to  
utilize the Synchronization Software between the Organizer and  
your PC.  
21  
 
Installing  
Serial Port Setup  
The serial port setting dialog box appears  
after you have finished software  
installation.  
Precautions:  
• Prior to installing the Synchronization Software, make sure that  
Microsoft® Outlook® is installed and set up. If not, install and set  
up the Outlook® first, then install the Synchronization Software.  
1. Insert the PC software CD-ROM into your CD-ROM drive.  
Installation process should automatically start.  
If the PC software screen does not appear, double-click My  
Computerto locate the CD-ROM drive directory, then double-click  
to launch installer.exefound on the CD-ROM.  
Click Auto Detect...to allow the Synchronization to automatically  
detect the appropriate serial port. Make sure that the unit is  
physically connected with the PC first, then click this button.  
If the desired serial port is not found, manually select the serial  
port from the drop-down list.  
2. Click the Installbutton.  
3. Follow the installation instructions that appear on the screen.  
4. When the installation is complete, click the "Finish" button to finish  
the installation process.  
Note:  
For Windows® 2000 Professional and Windows® XP, install/  
uninstall programs after logging on as an Administrator.  
22  
 
The Conflict Resolution Tab  
Synchronization Software  
The Synchronization softwares Conflict Resolution tab allows you  
to select the way data conflicts are resolved when data modifica-  
tions are made and the Synchronizeoption is selected on the  
General tab.  
After the Serial Port Setup is  
complete, the Settings window  
will appear.  
To bring up the Settings window  
manually, right-click on the  
Synchronization icon on the  
Windows® system tray, then  
select "Settings..." in the menu.  
Add all conflicting items: Each modification on both the unit and  
the PC is reflected and saved respectively after synchronization.  
Unit overwrites PC data: The PC data will be overwritten. The  
modifications made on the unit are reflected on the PC after  
synchronization.  
PC overwrites unit data: The unit data will be overwritten. The  
modifications made on the PC are reflected on the unit after  
synchronization.  
General tab  
This tab allows you to select the application that you want to  
synchronize with the PC.  
Click on the checkbox for each application to enable synchroni-  
zation.  
Use the "Option" button, or double-click the desired settings  
row to configure the communication method.  
The PIM Tab  
The PIM tab allows you to configure the download settings of the  
PIM data.  
Click the "Default" button to reset the Options settings.  
Use Outlook HOME Address: Downloads or synchronizes only  
data of HOME addresses.  
Use Outlook WORK Address: Downloads or synchronizes only  
data of WORK addresses.  
Today forward: Downloads or synchronizes only data of today  
and forward.  
All: Downloads or synchronizes all schedule data.  
Synchronization action:  
: Merges the data between the PC and the unit.  
: PC overwrites the data of the unit.  
: The unit overwrites the PC data.  
23  
 
Export/Import  
The Connection tab  
The Export/Import menu of the Desktop Utilities allows you to import  
data created by each PC application to the unit, or export data out of  
the unit.  
This tab allows you to change settings for the serial port and the  
password.  
Serial port : Specify the serial port to connect the unit to the PC.  
Auto Detect : Click to allow the PC to detect the appropriate  
serial port.  
Export: Select the desired item (application data, Food Database,  
Consumption Record, or Intake Record), then click Export...”  
and enter the desired filename to which you wish to export data.  
Import: Select the desired application name or Food Database,  
then click Import...and enter the desired filename from which  
you wish to import data.  
Desktop Utilities  
Launch "Desktop Utilities" from the Start  
menu, or right-click on the Synchroniza-  
tion icon on the Windows® system tray,  
then select "Desktop Utilities..." in the  
menu. Utilize the Desktop Utilities via the  
following graphic interface:  
Un-installing the PC software  
Prior to uninstalling the PC software, quit all programs.  
1. Within the Control Panel, launch Add or Remove Programs. In the  
list of installed software, select the PC software, then click the  
Change/Remove...button.  
Backup/Restore  
2. When the Install Shield program screen appears, select Remove,  
then click Next.  
The Backup/Restore menu of the Desktop  
Utilities allows you to make a backup file  
of the unit data, or to restore it back to the  
internal memory of the unit. Be noted that the setup parameters won't  
be backed up.  
3. For the verification prompt, click on the OKbutton.  
4. When the un-installation procedure is complete, click the Finish”  
button to finish.  
Backup: Select Backup...from button, then enter the desired  
name of the file to be backed up.  
Restore: Select Restore...from button, then select the desired  
name of the file to be restored.  
24  
 
When the “LOW BATTERY” Symbol Appears  
Battery Replacement  
When LOW BATTERYis displayed, immediately replace the  
operation battery with a new one.  
Batteries used  
The operation battery holder is indicated as “For OPERATION” in  
the battery compartment.  
Type  
Model  
Quantity  
Use  
Unit operation  
and backlighting  
Lithium battery CR2032  
2
If the battery level is low, the alarm may not sound, or similarly  
the Backlight may not function or remain on for less than the set  
interval. Continued use of the Organizer with low battery can alter  
or clear the memory contents. Memory contents may be lost if the  
battery is improperly replaced or if the following instructions are  
disregarded.  
Be sure to write down any important information stored in the  
memory before replacing the batteries.  
Precautions  
Note:  
Since improper use of the batteries may cause leakage or  
explosion, strictly observe the following instructions:  
After the battery replacement, check also that the Backlight  
functions properly.  
Caution:  
If fluid from a leaking battery accidentally gets into your eyes, it  
may result in serious injury. Should this occur, flush your eyes  
with clean water and consult a physician immediately.  
Should fluid from a leaking battery come into contact with your  
skin or clothes, immediately wash with clean water.  
If the Organizer will not be used for an extended period of time,  
to avoid damaging the Organizer remove batteries and store in a  
safe place.  
PC Link may not be available when the battery level is low.  
Under the low battery condition, new data entry and editing of  
existing data may not be performed in some modes. Also clock  
settings, step count function of the pedometer, and the calorie  
calculation may not be available.  
Do not leave exhausted batteries inside the Organizer.  
Do not use different types of batteries or partially used  
batteries.  
Insert the battery with its positive side (+) correctly oriented.  
Never throw batteries into a fire because they might explode.  
Keep batteries out of reach of children.  
When batteries become near exhaustion, remove them from the  
Organizer immediately to avoid battery leakage and corrosion  
inside the Organizer.  
When the Backlight Won’t Function  
When the Backlight cannot be turned on (except when LOW  
BATTERYis displayed or the Organizer is in the PC Link mode),  
replace the battery for the backlight (For BACKLIGHT &  
OPERATION).  
The backlight and operation battery holder is indicated as  
BACKLIGHT & OPERATION" in the battery compartment.  
"For  
Because the batteries in the Organizer were installed at the factory,  
they may become exhausted before the specified expiration time is  
reached.  
25  
 
Replacing the batteries  
Specifications  
Make sure the power is turned off before replacing the  
batteries.  
Do not press o until the battery replacement procedure is  
completed.  
Do not remove all of the batteries at once. Remove and replace  
batteries one by one.  
Model: ZQ-P20A6910  
Product name: Electronic Organizer  
Display: 3 lines of 12 digits  
Memory capacity: 1MB, Flash memory  
User area: Approx. 896 KB  
1. Press o to turn the power off.  
Clock mode:  
Accuracy: 60 seconds/month at 25°C  
Display: Year, month, day, day of the week, hour, minute, second,  
AM/PM  
2. Loosen the screw (turn counterclockwise)  
and remove the battery holder cover on the  
back of the unit.  
3. Remove one used battery using a ball-point  
pen or similar object.  
R
E
S
E
T
Clock function: 12-hour/24-hour format (switchable), 3 kinds of  
date type (switchable), world clock function, daylight saving time  
(summer time) display, daily alarm, hourly alarm  
Telephone mode: Entering and recalling of telephone entry (name,  
address, E-mail address, phone number, and web address (URL))  
Schedule mode: Entering and recalling of schedule entry (details, year,  
month, day, hour, and minute), schedule alarm  
Memo mode: Entering and recalling of memo entry  
Calculator mode: 10 digits (with calculation status symbols), arithmetic  
calculations, percentage, square root, memory calculation, etc.  
Currency/unit conversion mode:  
Do not use a mechanical pencil or sharp  
pointed object.  
R
ESE  
4. Install one new battery with the positive side  
(+) facing up.  
5. Repeat step 3 and 4 for replacing both  
batteries, if necessary.  
6. Replace the holder cover and secure with the  
screw.  
7. The power will be turned on 2 to 3 seconds  
after o is pressed.  
R
E
S
E
T
5 types of currency conversion (editable) and 9 types of unit  
conversion  
Game mode: 2 games  
If nothing appears on the display, press  
the RESET switch and press <. Do not tap f and press  
x. This key sequence will clear all the memory contents.  
8. Set the clock to the correct time. (see page 3)  
Spell Checker Mode:  
Approx. 10000 English words can be referred to as suggested  
entries.  
Caution:  
Clock settings and/or other settings and listings may be lost when  
batteries are removed for a long time. Replace the batteries as  
quickly as possible.  
Make sure to confirm all settings are set correctly after replacing  
the batteries.  
26  
 
Diet Function Mode:  
Step count precision: within 10 % (by vibration testing machine)  
Food Database: 200 foods  
Accessories: 2 lithium batteries (installed), CD-ROM software,  
PC-Link cable, operation manual, stylus, carrying case with  
belt clip  
Value entry: 2 fields (Calorie, Carbohydrate)  
Power consumption: 0.13 W  
Operating temperature: 0°C to 40°C  
Power supply:  
3.0V ... (DC) (Lithium battery CR2032 x 2)  
Auto Power Off Function: Approx. 5 minutes  
Battery life: (at 25°C)  
Approx. 6 months  
While PEDOMETER is set to ON, with 5 minutes of data  
search, 55 minutes of data display, and 10000 step  
counts per day.  
Approx. 5000 hours  
When data is continuously displayed with PEDOMETER  
set to OFF.  
Approx. 2000 hours  
When data is searched for 5 minutes and displayed for 55  
minutes per hourly use with PEDOMETER set to OFF  
Approx. 2 years  
When turned off and the clock is running with  
PEDOMETER set to OFF  
Approx. 4000 times  
When the Backlight is turned on for 10 seconds and  
turned off for 50 seconds per minute while the display is  
activated.  
Weight: Approx. 104 g (Including batteries)  
Dimensions: 69.8 mm (W) x 109.3 mm (D) x 16.3 mm (H)  
27  
 
A. Information on Disposal for Users (private households)  
1. In the European Union  
Attention: If you want to dispose of this equipment, please do not use the ordinary dust bin!  
Used electrical and electronic equipment must be treated separately and in accordance with legislation that requires  
proper treatment, recovery and recycling of used electrical and electronic equipment.  
Following the implementation by member states, private households within the EU states may return their used electrical  
and electronic equipment to designated collection facilities free of charge*. In some countries* your local retailer may  
also take back your old product free of charge if you purchase a similar new one.  
Attention: Your  
*) Please contact your local authority for further details.  
product is marked  
with this symbol. It  
means that used  
electrical and  
electronic products  
should not be  
If your used electrical or electronic equipment has batteries or accumulators, please dispose of these separately  
beforehand according to local requirements.  
By disposing of this product correctly you will help ensure that the waste undergoes the necessary treatment, recovery  
and recycling and thus prevent potential negative effects on the environment and human health which could otherwise  
arise due to inappropriate waste handling.  
mixed with general  
household waste.  
There is a separate  
collection system  
for these products.  
2. In other Countries outside the EU  
If you wish to discard this product, please contact your local authorities and ask for the correct method of disposal.  
For Switzerland: Used electrical or electronic equipment can be returned free of charge to the dealer, even if you dont  
B. Information on Disposal for Business Users.  
1. In the European Union  
If the product is used for business purposes and you want to discard it:  
Please contact your SHARP dealer who will inform you about the take-back of the product. You might be charged for the  
costs arising from take-back and recycling. Small products (and small amounts) might be taken back by your local  
collection facilities.  
For Spain: Please contact the established collection system or your local authority for take-back of your used products.  
2. In other Countries outside the EU  
If you wish to discard of this product, please contact your local authorities and ask for the correct method of disposal.  
28  
 
For Australia / New Zealand only:  
 
SHARP CORPORATION  
PRINTED IN CHINA/IMPRIMÉ EN CHINE/IMPRESO EN CHINA  
08BT (TINSE0836EH50)  
 

Sharp Flat Panel Television LC 32SB27U User Manual
Sony Car Stereo System Car Stereo System User Manual
Sony MiniDisc Player MZ R900 User Manual
Sony Personal Computer PCG R505TEK User Manual
Sony Projector CPJ D500 User Manual
Sony Water Dispenser 2 User Manual
StarTechcom Power Supply ATXPOWER400 User Manual
State Industries Water Heater CCVIT 2 User Manual
Sterling Plumbing Outdoor Shower SP1500D Series User Manual
SVAT Electronics Security Camera CMOS BW User Manual