Instruction Manual
230 Watt PS2 Replacement Computer PC Power Supply
PS2POWER230
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
*actual product may vary from photos
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Packaging Contents
• 1 x 230 Watt AT Power Supply
• 1 x Instruction Manual
• 1 x Power Cord (NA)
Installation
Note: Check the power supply voltage before installation. It should
be the same as your local power voltage (115V for North America
and 230V for most of the European countries). Change the voltage
setting if necessary.
1. Disconnect the power cord from your old power supply.
Specifications
5.9 x 3.35 x 5.87 in. (150 x 85 x 149
mm)
2. Follow your computer case manual and open the case.
3. Disconnect all the power connectors from the mother board and
Dimensions
the peripheral devices such as hard drives, floppy disks, etc.
4. Remove the existing power supply from your computer case and
replace it with the StarTech.com power supply.
5. Connect the power connectors to your motherboard and
peripheral devices.
6. Close your computer case.
7. Connect the power cord to the StarTech.com power supply.
Weight
2.82 lbs (1.28 kg)
115/230 V
230W
Input Voltage
Output Voltage
4 x 4-pin LP4 female, 2 x small internal
power, 2 x LED display power, 1 x PS/2
motherboard adapter
Connectors
Manual Revision: 02/03/2012
|