Instruction Manual
Component / VGA to HDMI® Video Converter
VGA2HD2
RCA Two
Channel Audio
Input Ports
HDMI® Output
Port
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Packaging Contents
• 1 x PC/HD to HDMI® Converter with Audio
• 1x VGA to Component (RCA) Breakout Cable
• 1x Universal Power Adapter (US/UK/EU/AUS)
VGA Input
Port
Phase
Control
System Requirements
• VGA or Component (RGB/YPbPr) enabled video source device (i.e.
computer, Blu-ray Player)
• HDMI® enabled video display device (i.e. television, projector)
• HDMI® Destination Cable
• VGA Source Cable for VGA Video (Component to VGA adapter
included for Component Video)
• 2 Channel RCA Audio Cable (Optional)
Power Adapter
Port
Input Select Switch
(YPbPr/RGB)
Hardware Installation and Operation
Specifications
1. Using a VGA cable, or the included VGA to Component (RCA)
Breakout Cable, connect the video output source from the VGA or
Component enabled video source device (i.e. computer, Blu-ray
Player) to the VGA Input Port on the VGA2HD2.
2. Using an HDMI® cable, connect the HDMI® Output port on the
VGA2HD2 to the HDMI® input port on the HDMI® enabled video
display device (i.e. television, projector).
Converter Type
Format Converter
Component (YPbPr)
VGA (RGB)
AV Input
Audio RCA
AV Output
Interface
HDMI
VGA
3. (Optional) If the input signal includes an audio source, connect
the audio source device (i.e. computer, Blu-ray Player) to the RCA
two channel audio input ports on the VGA2HD2 using an RCA
audio cable.
4. Set the Input Select Switch to YPbPr or RGB, depending on which
color space the video output device supports.
Audio
Yes
Output Signal
Max Resolution
Wide Screen Supported
HDMI
1080p
Yes
NOTE: Component devices typically support YPbPr, while VGA
devices typically support RGB, check the video source device manual
to confirm which color space is supported.
5. Connect the Universal Power Adapter from an available wall
outlet to the Power Adapter Port on the VGA2HD2.
6. The VGA or Component video source image will now appear on
the HDMI® display.
Manual Revision: 08/07/2012
|