READ AND SAVE THIS INSTRUCTION MANUAL
SUNPENTOW N
Air Cooler
Model SF-609
Contents
Functions
1. Cooling, humidifying and air
purifying
Parts Name
Product Appearance
Control Panel
2. Adopted photo-catalysis
technology, Anti-bacterial water
tank and germ-free water curtain
cycle system
Important Safety Notes
Operation
Specifications
Circuit Diagram
Maintenance
3. Three fan air speeds with Sleep
Mode function
4. Automatic swing
Trouble Shooting
Your Guarantee
5. Timer from half an hour to
Seven and a half hours
6. Castor wheels for portability
7. Remote control
8. Ionizer adopted
Please read the instruction carefully
prior to use.
1
Important Safety Notes
1. Make sure the correct power (120V/60 Hz) is supplied.
2. To avoid electric shock or personal injury, do not operate any appliance with a
damaged cord or plug or after the appliance malfunctions or has been damaged in
any manner. Return the unit to Sunpentown (see warranty) for examination, repair or
adjustment.
3. Unplug the appliance when not in use and before maintenance or servicing.
4. The applicable temperature to run this unit is betweenF3-1204F. Do not operate
when the temperature is above or below this range. Do not let unit sit under direct
sunlight.
5. When the tank is full, move unit from the side slowly to prevent water from spilling.
6. Do not place heavy objects on the machine.
7. Close supervision is necessary when any appliance is used by or near children.
8. When unplugging, pull from the plug and not on the cord.
9. Turn off the unit when adding water.
10.Turn off and unplug unit before cleaning.
11.To avoid excessive dampness, do not use the humidifying function for an extended
period of time in an area with poor circulation.
12.When not planning to use the unit for a long period of time, please unplug the power
cord, drain water, and store in a cool, dry place.
13.Please change water often to keep the water tank clean. It is recommended to
change the water once every 1 ~ 2 days.
Operation
Please fill the water tank as instructed below before turning on the unit.
Operating instructions:
1. ON/OFF button
Press once to turn ON unit,he “H” indicator light of “SPEED” mode will be on.
Press again to turn OFF unit.
2. SPEED button
When turned ON, the unit starts on High (the “H” indicator light is on), to adjust:
o Press once for Medium speed (the “M” indicator light is on)
o Press again for Low speed (the “L” indicator light is on)
o Press again for High speed with Sleep mode (the “H” and “SLEEP” indicator
lights are on).Unit will operate in High speed for 2 min, Medium speed for 1
min, and back to High for 2 min. and so on for approx. 30 minutes. After which
the unit will switch to operate in Medium speed for another 30 minutes and
finally switch to Low speed. Unit will run in Low speed until powered OFF.
o Press again for Medium speed with Sleep mode (the “M” and “SLEEP” indicator
lights are on).Unit will run in Medium speed for 2 min, Low speed for 1 min,
and back to Medium for 2 min. and so on for approx. 30 minutes. After which,
the unit will switch to Low speed and continues in Low until powered OFF.
o Press again for Low speed with Sleep mode (the “L” and “SLEEP” indicator
lights are on).Unit will operate in Low speed for 2 min, stop 1 min, and back to
Low for 2 min. and so on. Unit will continue to run in this mode until powered
OFF.
o There are total of six different settings to choose from.
3
o To avoid catching a cold while sleeping, the Sleep mode will automatically
decrease the fan speed slowlyT.imer can also be used in Sleep mode.
3. SWING button
Press the SWING button to select the swinging function:
o Press once to turn on the swinging function (indicator light is on), which can
cover 60° horizontally
o Press again for fixed direction (indicator light is off)
4. TIMER button
Each press of the timer button will add 0.5 hour to the timer until it reached the
maximum of 7.5 hours. Adding the numbers indicated equals the total time for the
timer. For example: when the 0.5 and 1 indicators are on at the same time, it means
the timer has been set for 1.5 hours; when the 0.5, 1, 2 and 4 indicators are on at
the same time, the timer has been set for 7.5 hours. If none of the timer indicators
are on, the unit will run continuously.
5. COOL AIR (HUMIDIFYING) button
o Press once to turn on the water pump, press again to turn off the water pump
o If the water level is aboveM“IN”, the red indicator light will turn on and the pump
will start working. After 3 ~ 5 minutes, the unit will send out moist and comfortable
cool air.
o If the water level is belowM“IN” or if the water tank is empty, please do not turn
on this function. The unit will beep 5 times and the red indicator light will be
flashing to warn that the water tank is low/empty and the pump will NOT work.
o While operating in Cool Air / Humidifying mode, when the water tank reaches half
point, the unit will bee5ptimesto warn you that the water tank is half empty. The
red indicator light remains on and the unit continuous running.
o To prevent damage to the water pump, when operating the unit without water,
please keep the Cool Air / Humidifying function OFF. The unit will operate as a
normal electric fan.
6. ION button
o Press once to turn the ION function on (indicator light is on)
o Press again to turn ION function off.
7. WATER FILLING INSTRUCTIONS
o Please be sure the power is OFF before filling water.
o Fill the water tank by pouring water and adding ice into the Ice & Water Inlet.
o Amount of water added can be seen from the water indicator located at the
bottom front.
o Make sure the water indicator indicates the water level is aboMvIeN”“.
o Pour in 2/3 of water (6 Liters) and 1/3 of ice (3 Liters) for best cooling effect.
o You can also put some ice or ice packs in the “Ice Box” located on the top of the
unit for extra cooling (optional).
o DO NOT add more than 10 Liters of water into the water tank. The water indicator
light should never rise abovMe A“X” or the water tank will overflow.
NOTE: When operating the unit for the first time, please add water to the
“MAX” level.
4
Specifications
Model
Rated
Voltage
Rated
Frequency Power
60Hz
Rated
Water
Consumption
Water Tank Speed
Capacity
Dimensions
N.W.
SF-609
~120V
60W
0.6-0.7L/h
10L
7m/s
5.4”x11.8”x25.2”
16.5lb
Circuit diagram
N
E
L
LeafMotor
Water Pump
MotorCapacitor
L N
M L
H
COOL F/R
PCB
SirenPCB
MainMotor
CircuitDiagram
Maintenance
Cleaning the filter net and water tank
Pull out
water tube
It shouldbe
putin thesun
Photocatalysisfilter net
can'tbewatered
Watercurtain
Filter shelf
Rearpanel
Dust filter net
Photocatalysis
filter net
(Figure1)
(Figure4)
(Figure2)
(Figure3)
To ensure best humidifying and purifying effect, please clean the filtration system once
a week.
1. Pull the dust filter net upwards from opening slot of filter shelf
2. Remove the photo-catalysis filter net (small black filter)
3. Rinse the dust filter net with clean water and allow to dry
4. Replace the photo-catalysis filter net and insert the dust filter net back in place
o Do not wet the photo-catalysis filter (figure 3), insolate it in the sun (figure 4)
5
Troubleshooting
Problem
Reasons
Solution
Turn on power
Switch off Timer mode
Power is not turned on
Timer fulfilled
Not blowing air
Unit is broken/defective
Contact Sunpentown
"On/Off" button not pressed Press the “On/Off” button
Unit will not turn off
Unit is broken/defective
Contact Sunpentown
Take off rear panel and filter
net, remove foreign object(s)
Contact Sunpentown
There are objects in it
Faulty motor
Air wheel/fan is loose
Unit makes noise
Contact Sunpentown
Water level low/empty
Faulty water pump
Add water to Maximum level
Contact Sunpentown
Not humidifying
No swing
“Swing” button not pressed Press the “Swing” button
Faulty leaf motor Contact Sunpentown
Your Guarantee
If this product is found to be faulty as a result of faulty materials or workmanship within
one year from date of purchase, it will be repaired or replaced free of charge.
This guarantee is subject to the following terms:
1. Sunpentown must be notified of the fault.
2. Proof of purchase must be presented to Sunpentown’s nominated representative.
3. The warranty will be void if the product is modified, misused or repaired by an
unauthorized person.
4. The guarantee after repair or replacement will not be extended beyond the
original one-year period.
5. All replacement parts or units will be new or reconditioned.
6. Parts or units, which are replaced, become the property of Sunpentown.
7. The warranty applies for the use of the product in the USA.
8. Warranty does not include freight charges.
This GUARANTEE is in addition to your Statutory Rights.
SUNPENTOWN INTERNATIONAL INC.
18249 Valley Boulevard, City of Industry, CA 91744
Tel: 626-581-1818 Fax: 626-581-1398
6
|