Installation of X-Port 10 with Director
This document explains how to connect the X-Port 10 to the Director system. This feature allows easy
connections for an external portable computer and automatic switching between the internal and external
computer with the Director system.
Supplied Components:
•
•
•
•
1 Connector Box
1 RS232 Blanking Plate
1 Pair of export 10 Mounting Bracket (Left and Right)
2 T201-0036 Cables, 1 T201-0072 Cable, 1 T237-0072 Cable, 2 T112-0036 Cables, 1 T323-
0036 Cable, 1 T325-0072 Cable, 1 T324-0036 Cable, 1 T308-0036 Cable, 1 HD15D-Sub to
BNC cable
•
•
•
•
•
1 TANDBERG Director label
4 #10-32 G-style panel nut retainer and 4 #10-32 x ¾” Black rack screw with washer
10 Black adhesive cable tie mounting base14 cable ties 4” long
2 #4-40 x 3/16” screws
1 instruction sheet
RS232 Blanking Plate Installation:
Install the blanking plate over the Computer 2
•
Serial connector located on the rear of the
Smart 3000i projector unit using the 2 supplied
#4-40 x 1/8” screws.
Connector Box Installation:
•
•
•
Install the connector box on the rear of the
Smart 3000i as shown.
Use the existing screws on the 3000i projector
to fasten the connector box.
Route the cables through the opening and
connect them as per labels. (See System
Connections)
1
D5018501
System Connections:
Connect the cables as shown in the diagram below and by matching the cable labeled ends to the
corresponding equipment.
DIRECTOR APPLICATIONS MODULE
LAN
PC VGA IN
DISPLAY VGA OUT
TOUCHPANEL
AUX CTRL 1
AUX CTRL 2
AUX CTRL 3 DIAGNOSTICS
PROGRAM
TOUCHSCREEN
MOUSE
CRESNET
SMART X-Port 10
T112-0036
T112-0036
PROJECTOR
VIDEO
COMPUTER 1
VIDEO
RGB OUT
SERIAL
AUD OUT
COMPUTER 1
SERIAL
PEN
T201-0036
T308-0036
T201-0036
T324-0036
TRAY
DATA
COMPUTER 1
AUDIO
INTERNAL
COMPUTER 1
SPEAKER
SEE NOTE 1
T237-0072
COMPUTER 2
VIDEO
NOTES:
1 - CABLE PART OF 3000i
(LABELLED AS RGB 2 IN)
RGB OUT
SERIAL
AUD OUT
COMPUTER 2
SERIAL
2 - CABLE SUPPLIED WITH X-PORT 10
CONNECTS TO X-PORT 20 INTERNAL TO 3000i
POWER SUPPLY
EXTERNAL
COMPUTER 2
T325-0072
COMPUTER 2
AUDIO
SEE NOTE 2
REAR INTERFACE PANEL ON 3000i
CABLE LOOM WITH 3000i
3
D5018501
|