VocoPro Car Speaker PV 802 User Manual

Attaching the Speaker Stand Adapters  
The PV-802 speakers can each be mounted on speaker stands using a VocoPro speaker stand adapter (sold separately).  
NOTE: These speaker stand adapters are included with the purchase of VocoPro SS-88 speakers  
stands. Contact your local VocoPro dealer to order a pair of VocoPro SS-88 speaker stands.  
Attaching the Adapter to the Speakers  
NOTE: The 4 mounting screws are included with the PV-802.  
1. Remove the rubber pads covering the screw openings on the bottom of the PV-802 speakers to reveal the  
holes for the mounting screws. (Fig A)  
NOTE: DO NOT remove the screw that is already on the bottom of the PV-802 main speaker. This  
screw is keeping the internal amp and mixer in place and must not be removed.  
2. Align the slots on the flat part of the adapter with the holes on the bottom of the PV-802 speaker (Fig. B)  
3. Screw in the screws, tightly fastening the adapter to the speaker.  
NOTE: Make sure the adapter is attached firmly to the speaker.  
MAIN SPEAKER (BOTTOM)  
SECOND SPEAKER (BOTTOM)  
DO NOT  
REMOVE  
Rubber Pads/  
Screw Holes  
Fig.A  
Fig.B  
1
 

Taylor Blender AB 1000 BL User Manual
Taylor Weather Radio 4753 User Manual
TDK Stereo System HBA 2030 User Manual
Technicolor Thomson Network Card 8900NET User Manual
TERK Technologies Stereo System TV36 User Manual
Texas Instruments Stereo Amplifier SLOU020A User Manual
Toshiba Car Satellite Radio System C850 User Manual
Tribest Humidifier HU1020 User Manual
Verona Appliance Trim Kit VEGCT424F User Manual
Vizio TV Antenna E551d A0 User Manual